If Windows 10/11 blocks the install, you may need to temporarily Disable Driver Signature Enforcement in the Advanced Startup settings. Cable Check:
Upon reboot, a list of startup settings will appear. Press the or F7 key on your keyboard to select "Disable driver signature enforcement" .
The easiest way to install the driver is through the official Xinje programming software package. Step 1: Locate the Driver Folder
: Download and install either XGCP Pro (for XL/XD series) or XC Programmable Controller Software (for XC series). The necessary USB drivers are typically bundled within these software installation folders. xinje plc usb driver install
as the connection type (or select the specific COM port assigned).
2. PLC is Not Recognized At All (No Yellow Exclamation Mark)
Look for an "Unknown Device" or a device labeled "Xinje PLC" under "Other devices" or "Ports (COM & LPT)". Right-click the device and select . If Windows 10/11 blocks the install, you may
Look for a new category called or Universal Serial Bus controllers .
Upon reboot, a list of options will appear. Press or 7 on your keyboard to select Disable driver signature enforcement .
Plug the other end into an available USB port on your PC (preferably a USB 2.0 port, as they offer better legacy stability). The easiest way to install the driver is
You must temporarily disable Driver Signature Enforcement . Restart your PC while holding the Shift key. Go to Troubleshoot > Advanced options > Startup Settings > Restart . Upon reboot, press 7 or F7 to select "Disable driver signature enforcement." Try reinstalling the driver again.
Connect the other end of the cable into an available USB port on your PC.