It is highly recommended to perform a factory reset immediately after a major software update. This clears out old system cache files that might conflict with the new firmware configuration. Go to . Select Factory Setting (or Restore Factory Default ).
If the receiver fails to start after an update, you may need to reload the firmware using a "forced update" method (renaming the file to RomUpdate.bin on a USB drive).
Press on your remote. A prompt will appear asking: "Do you want to update software/database?" Select Yes and press OK .
: Locate your model in the search bar, download the latest version, and extract the .bin file if it is in a compressed .zip or .rar format. 2. Update via USB (Recommended Method) starsat sr 9990 hd extreme software update
Locate the extracted file, which typically ends in a extension.
Insert a USB drive, navigate to the channel manager, and select "Backup to USB" to save your personalized channel list.
the USB drive into the USB port of your Starsat SR-9990 HD Extreme. It is highly recommended to perform a factory
Memory support for over 100 satellites, 1,000 transponders, and 8,000 channels.
If a power outage occurs during the flash process, the receiver might get stuck. You will need to recover it using an RS232 null-modem serial cable, a PC, and the StarSat loader tool.
The StarSat SR-9990HD Extreme is a DVB-S/DVB-S2 compliant Full HD satellite receiver. It comes equipped with dual USB 2.0 ports, supports up to 8,000 channels, multi-language Electronic Program Guides (EPG), PowerVU/Biss Auto-Roll keys, and external USB Wi-Fi network dongles. Step 1: Download Official Firmware Select Factory Setting (or Restore Factory Default )
the downloaded .bin file to the root directory of your USB drive (do not put it inside a folder). 2. Installation Process
This indicates a corrupted flash. Power off the receiver. Rename the correct firmware file to rom.bin and place it on an empty USB drive. Insert the USB, hold down the power button on the receiver's front panel, and turn on the rear power switch. Release the button when the update screen appears.
Browse the contents of your USB drive and select the .bin firmware file.
To ensure a smooth process and avoid "bricking" your device, prepare the following: Use a FAT32 formatted USB stick.
Power on your and plug the prepared flash drive into one of the available USB ports. Press the Menu button on your remote control.