Motorola Mag One A8 Programming Software (FHD)

: Program specific RX (Receive) and TX (Transmit) frequencies for direct (simplex) or repeater modes. PL/DPL Tones

Counterfeit Prolific PL2303 chip or Windows updated to an incompatible driver.

Connect the two-pin programming cable to the microphone/accessory port on the side of the radio. Plug the USB end into your computer. Turn the radio . 2. Launch the Software Open the Mag One A8 CPS software. 3. Read Data from Radio motorola mag one a8 programming software

Check under . If you see a yellow warning triangle, download the specific Prolific or FTDI driver assigned to your cable.

This is the most common error. It is almost always a driver issue. : Program specific RX (Receive) and TX (Transmit)

Click on the "Channels" tab to input RX/TX frequencies, bandwidth, and signaling codes.

Used to reduce interference from other radio users. Power Level: Select High (4W) or Low (1W) to save battery. Plug the USB end into your computer

Once you have finished editing, click the button (or go to Radio -> Write ). The software will upload the new settings to the radio. The radio may restart automatically. Troubleshooting Common Issues