Harvey Hv3 Water Softener Installation Manual -

Turn on the main water stopcock slowly and check for leaks around the new bypass pipework.

Thread your food-grade flexible hoses onto the bypass valves and connect them to the matching ports on the softener. Hand-tighten first, then finish with a light turn from a spanner. Avoid over-tightening to protect the internal plastic housing threads. Step 3: Setting Up Drain and Overflow Lines Harvey Water Softener Repair / Rebuild [Water Softening] harvey hv3 water softener installation manual

The salt chamber should never be allowed to drop below approximately 15cm in depth measured from the base of the brine cabinet. Turn on the main water stopcock slowly and

: Choose a level, dry indoor spot near the main water entry point and a drain. Slowly open the inlet and outlet valves on

Slowly open the inlet and outlet valves on the softener while closing the bypass valve. Check for Leaks: Inspect every joint and connection point.

Harvey HV3 Water Softener Installation Manual: A Step-by-Step Guide

Incoming dynamic pressure must be between a minimum of 1.7 Bar and a maximum of 6.0 Bar . If your pressure exceeds 5 Bar, install a pressure-reducing valve.