Is your wall box a or part of a multi-switch (3-way) system?
Gently tuck the wires into the wall box, ensuring there is enough room. Mount the timer using the included screws. Install Wall Plate: Screw the wall plate over the timer.
Press and hold the or Set button until the digits flash. ge timer switch 532641l3 instruction manual pdf pdf install
Connect the load wire from the timer to the Black/Red Load wire running to the light fixture. Step 4: Secure the Timer
This message indicates that a time setting has been locked or skipped. Press the TIMER button to scroll to the affected setting, then press OVERRIDE to unlock and adjust the time. Is your wall box a or part of a multi-switch (3-way) system
If you cannot find a neutral wire, consult an electrician. Finding the Instruction Manual PDF
While this guide covers 95% of installation and programming, the contains specific details unique to your revision: Install Wall Plate: Screw the wall plate over the timer
from the timer to the Line (HOT) wire in the box. Red lead from the timer to the Load wire in the box. Green/Bare conductor to the Ground wire.
Press the button to select your schedule block (e.g., Everyday, Weekdays, Weekends, or a specific single day).
: If your timer has a Yellow/Red lead, this is for 3-way setups. If you are only doing a single-pole installation, cap this wire with electrical tape.