Felder Ad741 Manual New |link| Jun 2026

| Specification | Detail | Source | | :--- | :--- | :--- | | | 410 mm (16⅛ in) || | Jointer Table Length | 2,000 mm (78¾ in) || | Max. Planing Height (Thicknessing) | 230 mm (9 in) || | Min.-Max. Workpiece Thickness | 3 - 230 mm (⅛ - 9 in) || | Max. Depth of Cut (Jointer) | 5 mm (13/64 in) || | Cutterblock Options | Standard self-aligning blades; Silent-Power® spiral (optional) || | Number of Knives (Standard) | 4 || | Feed Speed | 6 + 12 m/min (two-stage) || | Dust Extraction Port | 120 mm || | Motor Power | 5.5 kW (7.5 HP) ||

Here are some frequently asked questions about the Felder AD741 planer:

Checking the tension of the drive V-belts and lubricating the feed roller drive chains with a specialized chain lubricant.

Regular maintenance, as described in the official documentation , ensures the longevity of your machine. felder ad741 manual new

It looks like you’re searching for the manual for the (likely a jointer-planer combination machine).

Understanding why the thermal cutout might trigger during heavy stock removal. Conclusion

Tighten the screws using a torque wrench calibrated precisely to the manufacturer's specification (typically 5 Nm) to prevent fracturing the carbide. 6. Troubleshooting Common Issues Probable Cause Manual Solution Microswitch not engaged | Specification | Detail | Source | |

While standard with a 2 or 4-knife system, it is frequently equipped with the Silent-Power® spiral cutterblock , which reduces noise by more than half and provides tear-free results.

Providing these details will allow me to pinpoint the exact technical specifications or troubleshooting steps you need.

Connect a dedicated dust extraction system with a minimum airflow velocity of 20 m/s and a 120 mm hose diameter to ensure efficient chip clearance. 3. Machine Controls and Adjustment Interface Depth of Cut (Jointer) | 5 mm (13/64

You can contact your local Felder support team to request a digital version (PDF) of the operating manual and parts manual. Key Operational Tips for the

Select your feed speed (6 or 12 m/min) using the gear selector lever only while the machine motor is running. 5. Maintenance and Calibration Procedures