Plug the AC power cord into a live 110V/120V ground fault circuit interrupter (GFCI) protected outlet. Step 4: Configure Settings

Note: EverStart no longer maintains a dedicated manual archive, so avoid fake "driver download" sites.

Attach the clamp to the negative terminal or a grounded metal part of the vehicle frame.

The EverStart 60108M is a smart digital battery charger that handles 12V automotive and marine batteries. It features 2A, 10A, and 25A charging rates and a specialized reconditioning mode. ⚡ Quick Start Guide

Attach the Black (-) clamp directly to the negative battery post. Step 3: Configuring the Settings

This mode uses electric pulses to reduce sulfation on battery plates, which can restore lost capacity.

: Locate the (+) and (-) symbols on your battery.

If your display flashes an error or acts strangely, consult this quick guide:

This is where the 60108M shines. After leaving headlights on overnight, the battery measured 4V. The 30A boost for 5 minutes followed by the Engine Start mode fired up a 5.7L V8 instantly. Critical note: You must follow the manual’s warning—never crank for more than 5 seconds, and wait 3 minutes between attempts.

The EverStart 60108M is a heavy-duty, wheeled bench battery charger designed for professional shop use or serious home mechanics. It is built to handle standard 6-volt and 12-volt lead-acid, AGM, and gel batteries. 200 Amps (for emergency jump-starting) Boost Rating: 40 Amps (for rapid energy pumping)

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

On 12V/2A (trickle charge), it safely charged a motorcycle battery overnight. On 10A, it revived a deeply discharged car battery in about 4-5 hours. The 30A setting gets hot and is best for short bursts.

Everstart Battery Charger - 60108m Manual top