💡 : Use the ? key at any time to see available completions or the Tab key to auto-fill long command strings. I can provide more specific commands if you tell me:
copy running-config startup-config (or system-specific equivalent like save / configuration write ): Permanently commits the current configuration to the non-volatile storage flash.
Ericsson Mini Link CLI commands provide a powerful and flexible way to configure, manage, and troubleshoot Mini Link devices. By mastering these commands, network administrators can efficiently manage their networks, troubleshoot issues, and optimize device performance. This article has provided a comprehensive guide to Ericsson Mini Link CLI commands, covering their syntax, usage, and practical examples. By following best practices and using these commands effectively, administrators can ensure the reliability and performance of their Mini Link devices.
copy running-config backup-config — Creates a local recovery point on the node. ericsson mini link cli commands
MINI-LINK(config)# radio MINI-LINK(config-radio)# hop 1 MINI-LINK(config-hop)# frequency 17500 # MHz (e.g., 18 GHz band) MINI-LINK(config-hop)# tx-power auto MINI-LINK(config-hop)# modulation adaptive 2048QAM to BPSK MINI-LINK(config-hop)# remote-id 2 # ID of opposite end MINI-LINK(config-hop)# admin-state up
Master Guide to Ericsson MINI-LINK CLI Commands Ericsson MINI-LINK is a widely deployed microwave transmission solution used in mobile backhaul networks. Managing these network elements efficiently requires a deep understanding of the Command Line Interface (CLI).
show system log
set radio-link rx-frequency — Sets the receiver frequency.
Enables Adaptive Modulation and Coding (AMR), allowing the link to drop to lower modulations (e.g., QPSK) during severe weather to prevent total outages. 4. Performance Monitoring and Alarms
Displays learned MAC addresses to verify if end-to-end traffic is successfully reaching the MINI-LINK interface. 6. Diagnostic Loops and Testing 💡 : Use the
This is a comprehensive technical reference paper detailing the Command-Line Interface (CLI) commands for Ericsson MINI-LINK (TN/TN-CN, CN/CN-C, and CC/CC-C series) products, commonly used in microwave backhaul networks.
Provides a high-level overview of all configured radio links on the terminal. show performance radio-link [slot/port] Use code with caution.