Tighten the set screws evenly in quarter-turn increments until you feel slight resistance when moving the handwheels.
Test the emergency stop switch and the forward/reverse toggle before placing any stock in the chuck. Operating Controls and Drive Adjustments
This section covers how to properly mount the lathe to a sturdy base, how to connect the electrical components (including the motor and potential accessories), and how to level the machine to ensure accuracy. 2. Machine Components and Controls emco compact 5 manual exclusive
: 45T driver, 30T driven → (45×1.5)/30 = 2.25 — wait, that’s wrong. Correct formula for metric leadscrew:
An illustrated list of every component in the machine. This is invaluable when you need to identify a specific part for repair. It breaks down the entire lathe, including attachments like the milling machine, chucks, steadies, and dividing attachments. Tighten the set screws evenly in quarter-turn increments
This is the ultimate repository for lathe documentation. They offer high-quality, comprehensive manuals, including the Emco Compact 5.
: Always use an idler to maintain rotation direction. This is invaluable when you need to identify
On the first Saturday of the fourth week, Leo plugged it in.
Immediately apply a thin layer of ISO 68 way oil to the bed ways and slideways to prevent flash rusting. Controls and Operation Anatomy