Fill the brine tank with high-quality salt (tablets or blocks).
Allow the water to run through the drain for until it flows completely clear and bubble-free.
Open a nearby cold water faucet. Turn the bypass valve to the operational position. Let the water run until the sputtering stops and a smooth, steady stream flows, indicating all air has been purged from the system. Step 4: Digital Programming and Hardness Settings The BNT 1650 controller Go to product viewer dialog for this item. aqmos r2d272 installation new
Never wire powered sensors. Keep the system during this phase.
Turn off your house's main water valve and open the lowest faucet to drain the residual water from the pipes. Fill the brine tank with high-quality salt (tablets
Connect the opposite ends of the hoses to the inlets and outlets on the back of the Aqmos unit. Tighten all connections firmly with a wrench. Step B: Waste and Overflow Lines
Before you open the box, you must understand what the R2D272 is and is not designed to do. Turn the bypass valve to the operational position
Even with a , things can go wrong. Here is a diagnostic table.
This step prepares the resin inside the tank for softening.
